Hangar Vélo

Hangar Vélo is a parking for bikes with a modular structure and a double sliding entrance door.
Like the Coffre Vélo, the Hangar is made of aluminium and transparent polycarbonate with UV protection on both faces.

The Hangar Vélo is a parking for bikes with a modular structure consisting of a front door and a rear cover and, between the two, the desired number of intermediate modules.
The first module has 14 places and the following 12 places each.

The aluminum entrance door is a sliding door with double panels, including the necessary protection for its safe use in public spaces. Its panels are decorated with perforations that favor ventilation and the fixed surfaces are blind so that they can receive vinyl decorative elements.

Also in aluminum, the rear cover also has decorative perforations and surfaces that can be covered with vinyl.

The load-bearing arches of each module are made of aluminum tubes and corrugated galvanized steel sheets, supported by galvanized steel plinths.
Between two consecutive load-bearing arches, in the lower part, on either side of the Hangar, there are the side plinths, in aluminium, and covering the rest of the space, in the upper part, a transparent polycarbonate plate with protection UV on both sides. The fixing of the polycarbonate plate, as well as the side plinths to the arches and, in turn, to the bases, is carried out by means of stainless steel strapping.

To attenuate the action of the sun and heat in places where they are very present, there is the “Hangar vélo 3P” model whose roof is made of an aluminum composite panel; As an option, this composite panel can be replaced by a green roof, which in addition to contributing to the thermal insulation of the parking, gives it a green image.
Although the standard finish option is natural aluminium, the car park can be electrostatically painted on request, with a color from the RAL color chart.

Idderman integrates into its products components manufactured by leading companies that ensure the best reliability and the most complete security.

• Pholarus is a support for a photovoltaic solar installation adapted to the Hangar Vélo parking for bikes.
• Nice makes systems for the automation of parking doors.
• iLOQ provides cellphone-based access sharing solution without battery.

• Actuonix Motion Devices builds micro linear actuators for galleries and parkings.

• Sunpower Maxeon 3 Solar panels are covered by a 40-year Warranty.
• Fronius smart inverters ensure particularly efficient use of electricity from photovoltaic systems.

Its unlimited modular configuration means that it must be installed in its final location. Although the entire door leaf operating system is already assembled on the front door assembly, the rest of the components must be installed in the following order:

• Place the plinths on the ground and fix them using suitable bolts
• Lay out the front door assembly
• Arrange the back cover

• Install side modules

• Overlap the polycarbonate panels
• Attach the modules using steel straps
  stainless.
• Secure bike racks